JH8651 Fast-Charging Comprehensive Tester (Mobile Phone Charger)
It is primarily used for functional testing, parameter measurement, and performance evaluation of external‑power‑supply PCBA boards and finished products, such as power adapters. The tester integrates a programmable multi‑protocol electronic load module and four channel‑switching ports, offering standard electronic load functionality while supporting QC and PD fast‑charging protocols. A single unit can perform most of the functional tests required for PCBA boards or finished products, eliminating the need for auxiliary devices like dummy loads when testing fast charging. It supports file import and export, allowing test results to be directly saved as documents on USB storage devices such as flash drives. With both manual R&D mode and automated testing capabilities, it is well suited for development debugging and performance assessment, as well as for high‑volume production‑line testing.
Category:
- Product Description
-
I. Characteristics
It is primarily used for functional testing, parameter measurement, and performance evaluation of external‑power‑supply PCBA boards and finished products, such as power adapters. The tester integrates a programmable multi‑protocol electronic load module and four channel‑switching ports, offering standard electronic load functionality while supporting QC and PD fast‑charging protocols. A single unit can perform most functional tests on both PCBA boards and finished products, eliminating the need for auxiliary devices like dummy loads when testing fast charging. It supports file import and export, allowing test results to be directly saved as documents onto USB storage devices such as flash drives. With both manual R&D mode and automated testing modes, it is well suited for development debugging and performance assessment, as well as for high‑volume production‑line testing.
II. Application Areas
Multi-port phone chargers, power banks, and power adapters—output port scanning test.
III. Main Technical Parameters
Functionality
Specifications and Parameters
Number of channels
Single module, 4 ports
Display screen
8-inch screen
Supports fast-charging protocols
QC2.0, QC3.0, PD2.0, PD3.0
Maximum test voltage
60V
Maximum test current
10A
Maximum test power
150W
Load mode
CC/CV
Voltage accuracy
±(0.05%+0.05FS)
Current accuracy
±(0.05%+0.05FS)
Minimum resolution
Voltage: 0.5 mV, Current: 0.5 mA
Basic Protection Mode
OCP, OVP, OPP, OTP
CC line reverse insertion test
Support
Remote Voltage Measurement
Support
Supports step count
100
Number of stored files
120
D+/D- Front-and-Back Test
Support
Ripple Measurement
Support
Work mode
Mass production, research and development
Protocol Detection
Support
Overcurrent Protection Point Test
Support
PPS Scan Test
Support
PDO test
Support
VDM testing
Support
AC Parameter Testing
------
High- and low-voltage testing
------
Independent testing between channels
------
Multi-port combination testing
Support
PD3.1 Testing
------
Built-in E-Marker
------
Test Results Data Export
Support
Operating voltage
100-240Vac
Operating frequency
50/60Hz
Humidity / Operating Temperature
≤70% RH/ -10℃ ~ 50℃
AC and DC High-Voltage Testing
------
AC Power Testing
------
Variable-frequency power supply
------
Keywords: battery charge–discharge cabinet, lithium‑battery charge–discharge cabinet, sodium‑battery charge–discharge tester, solid‑state battery charge–discharge tester, lithium‑battery charge–discharge testing system, lithium‑battery charge–discharge tester, lithium‑battery capacity‑grading cabinet, power‑battery charge–discharge testing system, lithium‑battery pack charge–discharge testing system
Related products
Get a quote
Huizhou Jinghui Instrument and Equipment Co., Ltd.
Service Hotline:400-1331-882
No. 13, Jinda Road, Huinan Science and Technology Park, Huizhou City, Guangdong Province
E-mail:jh@jhyq.com
