JH20V10A-200CH Battery Module (Small PACK) Charge–Discharge and Capacity‑Matching Test Cabinet
1. Technical Features: ▇ Independent single-point operation, allowing independent charge and discharge settings for each channel—flexible and convenient. ▇ Powerful software with a user-friendly human–machine interface. ▇ Four-wire output interface, ensuring high accuracy. ▇ Modular design for easy maintenance. ▇ Energy regeneration: discharging energy back to the grid, promoting energy conservation and environmental protection. ▇ Scan‑code activation for simple operation and traceability.
- Product Description
-
I. Technical Features
▇ Independent single-point operation allows for independent charge and discharge settings for each channel, offering flexibility and convenience.
▇ The software is powerful and features a user-friendly interface.
▇ Four-wire output interface, with high accuracy.
▇ Modular design concept, easy to maintain.
▇ Energy regeneration: discharging energy back to the grid; energy-saving and environmentally friendly.
▇ Scan the code to start, making operation and traceability convenient.
II. Main Technical Parameters:
Serial number Specification and Model JH20V10A-200CH 1 Number of output channels 200CH 2 Communication method CAN/LAN network port 3 Output port and
Battery connection method
Same mouth 4 Testing method Compatible with (single-point/whole), QR code launch/click launch 5 Charging voltage DC 0.1～20V 6 Discharge voltage DC 20～1.5V 7 Charging current DC 0.1～10A 8 Discharge current DC 0.1～10A 9 Voltage accuracy ±(0.05%RD + 0.05%FS) 10 Current accuracy ±(0.05%RD + 0.05%FS) 11 Voltage resolution 1mV 12 Voltage stability ≤0.1% 13 Current resolution 1mA 14 Current stability ≤0.1% 15 Power output range 0–40 kW 16 Input impedance ≧10 MΩ 17 Input Power and Power Consumption AC 380V±10%/ 50Hz 18 Power accuracy ±(0.05%RD + 0.05%FS) 19 Energy Regeneration Efficiency 70%–85% (varies depending on battery capacity and associated cable losses) 20 Time setting range Set any value between 0 and 9,999 minutes; time units can be selected as h, min, or s, with a resolution of 1 second. 21 Temporal resolution 1s 22 Recording method Charging record time, discharging record time, idle record time, global record time 23 Recording frequency 100mS～65535S 24 Charging mode Constant-current charging, constant-voltage charging, constant-current/constant-voltage (CC/CV), and constant-power charging. 25 Charging termination criteria Voltage, current, time, capacity 26 Discharge mode Constant-current discharge, constant-voltage discharge, constant-power discharge, and constant-resistance discharge 27 Discharge cutoff conditions Voltage, current, time, capacity 28 Protection function Power input voltage protection: reverse polarity protection, overvoltage protection, overcurrent protection, and overtemperature protection.
Data anomaly recovery;
Battery reverse-connection protection function;
4. The software provides protection against overvoltage, undervoltage, overcurrent, undercurrent, and overload; the thresholds for voltage and current protection are user‑configurable, and the system can issue alerts and log events upon activation of these protections.
29 Number of single-cycle steps ≤100 steps, with nested loop functionality 30 Continuous working hours The equipment’s power rating shall ensure that all channels can operate at full load continuously, 24/7, 365 days a year. 31 Equipment noise Less than 72 dB 32 Circuit structure Modular structural design, facilitating replacement and maintenance. 33 Battery connection method
(Copper nose or alligator clip
Choose one of two)
34 Volume W2000*H1860*D750mm 35 Weight Approximately 300 kg 36 Software
1. The software supports various resumption modes, including manual pause‑and‑resume, automatic resume upon software shutdown, resume after power loss, resume following a communication interruption, and resume after an abnormal stop.
2. Supports barcode scanning, enabling the reading of both 1D and 2D barcodes, with options such as sequential scanning, skip‑channel scanning, and tray‑based scanning.
3. Detailed test data is stored locally, allowing you to view current and historical data for each channel at any time. Data can be presented either as tabular values or as corresponding curves, and you can export the data as Excel reports individually or in batches. Additionally, you can configure the system to automatically export the data upon test completion as needed.
4. Supports capacity grading, enabling battery grade classification.
5. Supports pass/fail judgment at the end of testing, determining Pass/NG results based on specified cycle capacity, voltage, time, and other parameters.
6. Supports various step‑by‑step protections as well as global protection against voltage, current, and temperature abnormalities, with corresponding fault alarms.
7. Supports unit conversion;
8. Supports backend storage on the database server or integration with the MES (optional);
9. Supports MES system creation (optional);
10. Offline software protection;
11. The software offers free upgrades.
37 Operating temperature / Storage temperature -10℃～35℃/-20℃～60℃ 38 Operating/Storage Ambient Relative Humidity ≤70% RH / ≤80% RH (no condensation) 39 Equipment maintenance Do not open the chassis unless you are a qualified professional. Regularly inspect the device’s connectors to prevent poor contact. 40 Transportation The packaging is suitable for transportation by car, ship, aircraft, train, and other modes; during transit, it should be protected from rain, and loading and unloading must be carried out in a careful and courteous manner.
Keywords: battery charge–discharge cabinet, lithium‑battery charge–discharge cabinet, sodium‑battery charge–discharge tester, solid‑state battery charge–discharge tester, lithium‑battery charge–discharge testing system, lithium‑battery charge–discharge tester, lithium‑battery capacity‑grading cabinet, power‑battery charge–discharge testing system, lithium‑battery pack charge–discharge testing system
Related products
Get a quote
Huizhou Jinghui Instrument and Equipment Co., Ltd.
Service Hotline:400-1331-882
No. 13, Jinda Road, Huinan Science and Technology Park, Huizhou City, Guangdong Province
E-mail:jh@jhyq.com
