JH100V60A Battery (EOL) Test Platform (Complete Battery Comprehensive Tester)
Scope of Application: This applies to functional verification testing of semi‑finished and finished products during the production of power battery packs for automotive electronics, aerospace, marine applications, solar energy storage, electric bicycles, electric motorcycles, backup power systems, communication power supplies, and energy storage, as well as to laboratory research and development testing.
- Product Description
-
I. Scope of Application
It is used for functional verification testing of semi-finished and finished products, as well as for research‑lab testing, in the production processes of power battery packs for automotive electronics, aerospace, marine applications, solar energy storage, electric bicycles, electric motorcycles, backup power systems, communication power supplies, and energy storage.
II. Equipment Environmental Requirements and Technical Specifications
2.1 Power Supply: AC voltage 220 V ± 10%, frequency: 50 Hz ± 10%;
2.2 Ambient temperature: 0–45°C;
2.3 The environment shall be free from severe vibrations and the presence of corrosive gases, as well as flammable or explosive gases.
III. Main Components of the Equipment
Serial number Name Model number Brand Quantity 1 DC power supply CSP-3000-60 Meanwell 1 piece 2 Internal Resistance Module / 
1 piece 3 Load module IR MOS/Chien-Chun Fan 
1 piece 5 Short-circuit module Omron/Panasonic 
1 piece 6 Motherboard Control Box ST/Mingwei Power Supply 
1 piece 7 Monitor 19 inches AOC 1 piece 8 Industrial PC MFC-1000 Control end (adipcom) 1 unit 9 Cabinet Standard cabinet 
1 piece 10 Software system JH testing software 
1 set 11 Wire harness / 
1 set IV. Feature Overview
4.1 Equipment Test Items
Product model JH100V60A Battery (EOL) Test Platform Purpose For testing semi-finished and finished battery packs below 100 V. Basic Test Items
Let stand Battery activation (via charging, discharging, and load disconnect methods) Open-circuit voltage 1, Open-circuit voltage 2 (can measure the charging port voltage) Internal resistance of the battery DC internal resistance Discharge testing (assesses the battery pack’s continuous load‑carrying capability and checks the voltage drop ΔV during sustained discharge) Discharge Overcurrent Test (testing the battery pack’s discharge overcurrent protection function, supporting secondary-level protection testing) Charging Test (continuous charging function of the battery pack, verifying whether charging is functioning properly) Overcurrent Charging Test (testing the battery pack’s overcurrent protection function, supporting secondary-level protection testing) Resistance R1, R2 testing (including ID and NTC resistor tests) Short‑circuit test (tests the battery’s positive and negative terminals for a short circuit, measures the battery’s cutoff protection time at the µs level, and supports disabling voltage detection and restoring voltage detection) Equipment protection function Software Protection Feature: Power-Off Data Protection Hardware protection: power‑off protection, short‑circuit protection, reverse battery connection protection, and incorrect wiring protection. 4.2 Equipment Technical Parameters
Test class Test Item Measurement range Resolution Open-circuit voltage Open-circuit voltage 1 0-100V 2mV Open-circuit voltage 2 0-100V 2mV AC internal resistance / DC internal resistance Internal Resistance Test 0-1000 mΩ 1 mΩ Discharge test Starting voltage 0-100V 2mV End voltage 0-100V 2mV Discharge current 0.1-60A 1mA Discharge time 0-60S 1mS Discharge Overcurrent Test Overdischarge current 4-60A 1mA Overcurrent delay 0-30S 1mS Short-circuit protection Short-circuit protection delay 0-9999uS 1uS Charging test Starting voltage 10-100V 2mV End voltage 10-100V 2mV Charging current 0.1A-20A 1mA Charging time 0-60S 1mS Charging Protection Test Overcurrent charging 4-20A 1mA Charging delay 0-30S 0.1mS Resistor R1/R2 NTC, ID 0-1000 kΩ 0.1 kΩ Sustainable output power 2KW Sustainable Load Power 4KW Online mode Serial communication (RS-232, supports multi-unit networking) Test data Generated data tables are saved automatically and can be exported to Excel. Barcode Management Supports barcode activation and binding of test data. Warranty period 1 year Thermal conductivity Forced air cooling via the ventilation system. Chassis dimensions W1130*D740*H950mm Weight 200KG Number of channels 1 Equipment accessories See the list of random materials.
Keywords: battery charge–discharge cabinet, lithium‑battery charge–discharge cabinet, sodium‑battery charge–discharge tester, solid‑state battery charge–discharge tester, lithium‑battery charge–discharge testing system, lithium‑battery charge–discharge tester, lithium‑battery capacity‑grading cabinet, power‑battery charge–discharge testing system, lithium‑battery pack charge–discharge testing system
Related products
Get a quote
Huizhou Jinghui Instrument and Equipment Co., Ltd.
Service Hotline:400-1331-882
No. 13, Jinda Road, Huinan Science and Technology Park, Huizhou City, Guangdong Province
E-mail:jh@jhyq.com
